Liberty Inspection Inc. is an independent full service Non Destructive Testing Laboratory that provides inspection services to the aerospace, nuclear and petro-chemical industries.
Conger-Elsea is recognized as a global leader in training and consulting services to various industries including NDT. Services include Risk Assessment, Corrective Action, Safety Culture, Casual Analysis and Regulatory Compliance.
Sensor Networks, Inc. (SNI) provides permanently-installed ultrasonic sensors and systems for monitoring the condition or integrity of critical assets in the Oil and Gas, and Power Generation industries. SNI also provides UT applications engineering, UT standard & custom transducers including phased-array and RVI products.
Commodity Resources and Environmental (CRE) specializes in the recycling and destruction of NDT film nationwide. CRE will pay you for the value of the silver on your film. Please contact us for a quote.
NDT Classroom recognizes the need for effective web based NDT training. Until recently, video-based training on the internet was not possible and therefore highly engaging, interactive HD quality video-based online training could not be reliably delivered. NDT Classroom has combined a state of the art media production company and NDT industry innovators to provide the highest quality training with the best delivery method available. There are other web based training courses available, but they cannot show real HD video examples being performed. Watching a largely static slide show online is not effective training. In addition, these courses have been developed to be used through our NDT Classroom Learning management System or for customization to a particular company standard. These course can be added to an existing company LMS for seamless integration.
Calvert Street Capital Partners is a lower middle market private equity business based in Baltimore, Maryland. We grow companies in partnership with operating management by executing a buy and build strategy to create significant equity value.
We make control investments in scalable niche manufacturing and business service companies. We invest in companies with a minimum of $5 million of EBITDA. We invest $10 to $40 million of equity capital in each platform strategy investment.
We were founded in 1995 and have a consistent, demonstrated track record of developing smaller, entrepreneurially-managed companies into significantly larger and more profitable, professionally-managed enterprises. Since our inception, we have acquired more than 40 companies in a wide variety of industries.
Silver Refining & Recylcing Experts
Our continuing goal as a refiner and manufacturer is to assure our customer’s confidence that Pyromet is supplying them with the best refining returns and supplying consistently high quality products. While maintaining these high standards, we strive to be profitable enough to have a work environment where employees enjoy coming to work and their safety can be assured. Pyromet performs all assaying and refining at our Aston, Pennsylvania facility. We guarantee the highest standard of quality control. Pyromet silver products are assayed and tested to meet American Society for Testing Materials (ASTM) purity standards. Pyromet takes quality control and precise weights and measures very seriously for both the refining and product fabrication sides of our business.
Provides Inspection and NDE personnel as required to NDE and Engineering firms. Certifications include: API QUTE, SWUT, UTT, MT, PT, VT, API, CWI AND NACE.
Exclusive North America distributor: Complete NDT Radiographic Film Digitizing solution; VIDAR NDT PRO Digitizer, AcuScreen PRO Software, Multi-Strip Film Feeder
Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets.
AMS Store and Shred, LLC can digitize your entire radiographic film library at no cost in most cases and provide you a Silver Rebate! Your film images will be stored on 50-100 year archivable Blu-ray discs. These discs will be stored in a Blu-ray disc jukebox optical library rack. All metadata associated with your images will be retained. Benefits include: Fast digital retrieval, Images transmitted anywhere in the world, Digital images that are technologically superior to film because of the software enhancement capabilities, Costly storage warehouse retrieval and maintenance personnel no longer required, and a second set of discs made during the digitizing process providing you, for the first time, a “disaster recovery” plan. All films are destroyed and completely recycled for a more sustainable tomorrow. AMS adheres to the strictest security procedures and exceeds Defense Department requirements.
If you have radiographic films that exceed their retention period and you want them to be destroyed, recycled and receive a Silver Rebate, Partner with AMS. AMS has over 35 years of experience and offers the highest levels of expertise in addition to environmental compliance.
Gen-X Machine Technologies, headquartered and located in Tulsa, Oklahoma, is a leading supplier of:
Precision parts for the aerospace industry
Machined components for the liquid and gas metering industry
Machined shafting for air handling equipment and artificial lifting equipment
Machined shafting and related components for the Pump Industry
Complex custom machined parts and fabrications
When considering reliability in machine support, please take into consideration that we have worked hard to build our reputation for consistent on time delivery and to our customer’s standards on each and every order.
UTEX Scientific Instruments produces high-frequency square wave pulser receivers, and inspection system building tools such as Winspect
Echo Ultrasonics provides third-generation couplants for today’s performance and safety requirements. We offer a new perspective on ultrasonic couplants.
Thermo Scientific Niton Analyzers specializes in portable nondestructive alloy analysis instrumentation. This division of Thermo Fisher Scientific is headquartered in Billerica, MA, with offices also in Bend, OR and Munich, Germany.
The Summit Group was founded by Jim Treat and Chuck Hellier, well known and respected pioneers in the Nondestructive Testing (NDT) industry. Summit offers a unique opportunity for NDT professionals to attend seminars and take courses designed specifically for their career development needs. Summits consulting services match the right experts with projects or ventures where additional resources are needed.
For over 45 years TED has served the equipment and supply needs of NDT (Non-Destructive Testing) professionals in diverse industries throughout the world. We have endured because we care about our customers Thousands of companies have come to rely on us again and again for a complete line of inspection and testing equipment. Our sales representatives and customer care staff are veteran NDT professionals who can help you solve tough inspection problems. They are backed up by a logistics team that is focused on timely and accurate order fulfillment. We truly value your business. We know you have many choices when it comes to your NDT needs and we must continually provide enhanced value and superior service to earn your trust.
Offices in Pennsylvania, Ohio, and New York; serving power producers, gas and oil industries, fabrication, aerospace, transportation, and refinery markets; privately owned; quality people making the difference.
Tulsa Gamma Ray is a full service company providing service in all NDT methods plus – IRIS, PMI, hazardous material screening, underground storage tank testing, and welder testing.
Virtual Media Integration (VMI) is the largest supplier of Computerized Radiography (CR) in North America. Currently VMI supports both the military as well as the commercial sectors of business with over 20 years of experience in the NDT market. VMI is the number one supplier for CR for the US Military worldwide.
VMI is the premier manufacturer and integrator of CR systems as well as other Digital Radiography (DR) systems including flat panel (DR) and Film Digitizer systems all running off a single software application platform developed and produced by VMI specifically for the NDT field. VMI’s team of experienced technicians and radiographers allows us to provide the highest level of support to our customers in markets including oil and gas, nuclear, military, aerospace, automotive, casting, manufacturing and more. We can fill any Digital Radiography application with the proper solution and support any customer so that they can meet the highest standards of digital imaging.
Venture offers a wide range of NDT equipment and supplies including x-ray, ultrasonic, magnetic particle and penetrant systems. Centrally located in Oklahoma, same day shipping is available from a large inventory of NDT supplies.
Varian is the leading manufacturer of high-energy x-ray devices, and digital x-ray detectors for nondestructive testing. Varian manufactures a variety of LINATRON accelerators that provide outstanding performance, short exposure times, high defect sensitivity, and reliability you can count on. Varian makes the radiography of very thick sections economically feasible. For over 25 years, more people have looked to Varian.
V.J. Technologies has more than 14 years experience in the design and installation of digital radiology inspection systems for a variety of applications.
Since our formation in 1958 Sonatest Ltd has grown to become one of the most respected suppliers of ultrasonic NDT instruments in the world with many global blue chip clients. Sonatest is focused on achieving our goals of “Simplicity, Capability and Reliability”, both within our product development programs and customer relationships. Sonatest has a long history of product innovation and market firsts that continues today in the latest advanced NDT testing equipment such as the VEO phased array flaw detector and Rapidscan real time 3D defect mapping.
Spellman High Voltage Electronics Corporation is the world’s leading independent high voltage power supply, X‑Ray generator and MONOBLOCK® X-Ray source manufacturer. Spellman High Voltage Electronics Corporation designs and manufactures custom and standard DC high voltage power supplies ranging from 120mW to 150kW with voltages from 250V to 500kV. Spellman’s high voltage power supplies are used in a vast array of applications serving the medical, industrial and scientific communities.
SDI is a leading manufacturer of automated ultrasonic inspection systems. It was formed in 1994 by a group of NDT engineers who had been manufacturing automated UT systems for over thirty years, formerly as Staveley Aerospace Systems Qualcorp, and Automation Industries. SDI operates from a 30,000 sq. ft. business park, Camarillo, California. In addition to sales, design and administration offices, the facility houses a large-scale manufacturing facility and machine shop and a fully equipped applications laboratory. All aspects of product design and manufacturing are carried out in house. In addition to the UT systems, SDI manufactures a range of specialized UT instrumentation and motion control products.
Tailwind Inspection provides in house and mobile NDT services to the aerospace industries, and is an FAA approved repair station with offices located in Tulsa, Dallas, and Hartford, CT.
Technologies Consulting International, (TCI, Inc.) a North Carolina Corporation and Global Technical Services a Washington State Corporation has entered into a mutual and corporation agreement to provide Nondestructive Testing, Training, Inspection and Consulting services. In addition to Quality Assurance and other related technical services. “This agreement will allow both companies to provide such professional services both the East and West coasts and other geographic areas across the country.” says Hussein Sadek TCI President. “The training services and classes offered will include major NDE inspection methods (UT, PT, MT, ET, RFT, MFL, VT and Infrared Testing, (Level I & II). Both Companies NDE instructors are highly qualified individuals with level III ASNT certifications and more than 35 years of field and teaching experience in the NDT and QA profession” says Marty Anderson Global Technical Services Manager. Check both Company’s web sites for future training classe schedules for the remaining of 2015 and 2016 years.
SCANTECH instruments offers design and manufacture of application specific inspection systems including ultrasonic and remote robotics.
Our company was formed initially in 1982 in Orange County, California. It began as an NDT Teaching and Consulting service. In 1987, in addition to the original charter, we began to specialize in preparing candidates for the ASNT Level III Method Examinations. We have been very successful in the latter endeavor and our now affectionately named Home of the Level IIIs. We teach NDT at Cerritos Community College; at our Home Office in Tujunga; at Aircraft X-ray Laboratories, Inc., and on-site as requested. We teach 8 NDT Methods and also consult in each of the following: PT, MT, RT, NRT, UT, ET, VT and LT. We are an approved Boeing site on the D1-4426 list for the major 5 NDT Methods.
Premium Inspection & Testing Group is a family of best-in-class companies working together as one team to safely deliver exceptional services to our clients through unparalleled knowledge, experience and technology leadership.
With the decades of experience and know-how from serving virtually every industrial sector and application requiring top notch inspection, testing and quality management solutions, Premium Group partners with you to provide the valuable, reliable and actionable information you need to make sound, engineering-based decisions regarding the fitness for service of your assets, components and weldments, while also ensuring full regulatory compliance during manufacturing, installation and in the field.
Company Divisions include: Capitol (Baton Rouge, LA), QCTL (Davenport, IA), and QCC (Davenport, IA).
ShawCor is a global energy services company specializing in products and services for the pipeline, exploration and production, and petrochemical and industrial segments of the oil and gas industry and other industrial markets. ShawCor operates through seven wholly owned business units: Bredero Shaw, Shaw Pipeline Services, Canusa-CPS, OMSCO, Guardian, DSG-Canusa and ShawFlex. Manufacturing, service facilities and sales offices, staffed by more than 5,000 employees, are located in over 20 countries around the world.
We are a major manufacturer of Visible and Florescent Penetrant, and Magnetic Particle high quality products that are QPL approved. Products are priced competitively and shipped globally